1～30 item / All 114 items
APS Touring (Auto Palletizing System): Vice Opening 100mm
APS Touring (Auto Palletizing System) We support the automation of high-precision machining by integrating precision vises and chucking tools from system3R and EROWA into an automatic work change transportation system.
Rust-resistant, magnetic stainless steel precision vice.
●Compact vice with strong clamping type
Rust-resistant, magnetic stainless steel precision vise.
A small precision vise with a special structure that prevents workpiece lifting.
Rust-resistant, magnetic stainless steel precision vise.
● Adopts a screw rod ● Ideal for securing small workpieces due to its compact structure ● Jaw design that is less susceptible to interference from tools and wheels
Rust-resistant, magnetic stainless steel precision vise.
● Adopts a screw rod ● Ideal for securing small workpieces due to its compact structure ● Jaw design that is less susceptible to interference from tools and wheels
Rust-resistant, magnetic stainless steel precision vice.
●Compact vice with strong clamping type
Rust-resistant, magnetic stainless steel precision vise.
● M3 tapped hole on the back side ● Material: SUS440 ● Hardness: HRC 48° to 55° ● Parallelism: within 0.003/100mm ● Squareness: within 0.003/100mm ● Fastened with a ball screw
Rust-resistant, magnetic stainless steel precision vice.
●Adopts a screw rod ●Ideal for securing small workpieces
Rust-resistant, magnetic stainless steel precision vise.
●Adopts a screw rod ●Ideal for securing small workpieces
Rust-resistant, magnetic stainless steel precision vise.
●Adopts a screw rod ●Ideal for securing small workpieces
Rust-resistant, magnetic stainless steel precision vice.
●Material: SUS440 ●Hardness: HRC48°～55° ●Parallelism: Within 0.003/100mm ●Perpendicularity: Within 0.003/100mm ●Can be clamped from two directions, ideal for EDM.
Rust-resistant, magnetic stainless steel precision vise.
This is a rust-resistant precision vise made of SUS440, which is difficult to rust, and has been precisely ground after heat treatment.
Rust-resistant, magnetic stainless steel precision vise.
● A small precision vice that can be tightened at a 45° angle ● Standard equipped with a stopper for adjusting the height position of the workpiece
Rust-resistant, magnetic stainless steel precision vise.
A compact precision vise that can be operated more easily, more stably, and with higher accuracy.
The SK precision vise is a high-precision vise made from Japanese tool steel SK material.
Since it is a type that tightens with a handle, it allows for easy attachment and detachment of the workpiece.
Rust-resistant, magnetic stainless steel precision vice.
This is a rust-resistant precision vise made of SUS440, which is difficult to rust, and has been precisely ground after heat treatment.
A highly precise sign vise made of stainless steel that is resistant to rust and has magnetic properties.
This is a rust-resistant precision vice made of SUS440, which is difficult to rust, and has been precision ground after heat treatment.
High-precision precision vice made of Japanese tool steel SK material.
A precision vice that is tightened with a hex wrench. Since it has no handle, the handle does not get in the way during processing.
The SK precision vise is a high-precision precision vise made from Japanese tool steel SK material.
Since it is a type that tightens with a handle, it allows for easy attachment and detachment of the workpiece.
You can utilize it in a wide range of fields from processing to measurement.
The material is SKS steel. This high-precision machining vise undergoes a full hardening treatment at HRC60°, ensuring no changes over time. It can be utilized in a wide range of fields from machining to measurement. Deep Jaw Type ● Made from SKS material. This precision vise features full hardening at HRC60° and is ground to a parallelism of 2 microns and a squareness of 5 microns within 100mm. There are no concerns about changes over time, allowing for semi-permanent use. ● It adopts a 45° down-hold mechanism to prevent workpiece lift during clamping. Jaw opening (mm): 150 Jaw width (mm): 120 Jaw height (mm): 60
High-precision precision vise made of Japanese-made tool steel SK material.
● A precision vise that is tightened with a hex wrench. There is no handle, so it won't get in the way during processing. ● The jaw has a step for thin workpieces.
The SKS precision vise is made from SKS material and undergoes sub-zero treatment, resulting in a high-precision precision vise with minimal aging changes.
SKS precision vise with distortion prevention feature
The SKS precision vise is made from SKS material and undergoes sub-zero treatment, resulting in a high-precision vise with minimal aging changes.
The special wedge prevents lifting, minimizing the workpiece's lift during tightening.
The new design's clamping structure allows the jaw to be moved while the vice remains on the table.
It is a precision vice that adopts a patented new design and robust construction, capable of gripping workpieces very securely.
The SKS precision vice is made from SKS material and undergoes sub-zero treatment, resulting in a high-precision precision vice with minimal aging changes.
This is a precision vice made using Japanese tool steel SKS and subjected to sub-zero treatment, resulting in minimal aging changes.
The SKS precision vise is made from SKS material and undergoes sub-zero treatment, resulting in a high-precision vise with minimal aging changes.
This is a precision vise made using Japanese tool steel SKS and treated with sub-zero processing, resulting in minimal aging changes.
System-3R and EROWA system compatibility. A new concept for JAM precision vises.
The Exc system is an original sub-plate attached to the J.A.M. precision vice, which can be used in combination with a macro palette (from System-3R) or a centering plate (from EROWA). The centering plate or macro palette elements can be provided by the customer. It is also possible to offer the system with the centering plate or macro palette already set up.
System-3R and EROWA system compatibility. A new concept for JAM precision vises.
The Exc system is an original sub-plate attached to the J.A.M. precision vice, which can be used in combination with a macro pallet (from System-3R) or a centering plate (from EROWA). The centering plate or macro pallet elements can be provided by the customer. It is also possible to provide it with the centering plate or macro pallet set up.
You can utilize it in a wide range of fields from processing to measurement.
The material is SKS. It is a high-precision processing vise with an HRC60° full hardening treatment that does not change over time. It can be used in a wide range of fields from processing to measurement. ● This is a wrench-tightening type vise that can be widely used for high-precision cutting, grinding, and electrical discharge machining.
It can be utilized in a wide range of fields from processing to measurement.
The material is SKS steel. It is a high-precision machining vise treated with full hardening at HRC 60°, ensuring no aging changes. It can be utilized in a wide range of fields from machining to measurement. ● Wrench tightening type. It exerts clamping force in the 45° downward front direction, preventing the workpiece from lifting. Jaw opening (mm): 50 Jaw width (mm): 45 Jaw height (mm): 20
